Replacing Ink Cartridges - Epson WorkForce WF-2540 Quick Manual

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin.
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Leave the expended cartridge installed until you have obtained a replacement, or the
ink remaining in the print head nozzles may dry out.
1. Turn on the product.
2. If an ink cartridge is expended, you see a message on the
LCD screen indicating which color to replace. Note which
cartridges need to be replaced and press
If you're replacing a cartridge before you see a message on
the LCD screen, press the x
to select
Maintenance
Cartridge Replacement
3. Lift up the scanner unit.
Caution: Do not touch the flat white cable inside the product.
4. Squeeze the tab on the cartridge and lift it up. Dispose of it carefully. Do not take the
used cartridge apart or try to refill it.
Warning: If ink gets on your skin, wash it off with soap and water. If ink gets into
your eyes, flush them immediately with water. If ink gets in your mouth, spit it out
and see a doctor right away.
26
Replacing Ink Cartridges
OK
button, press u or d
Menu
, press u or d to select
, then press .
OK
.
Ink