Epson AcuLaser C9300N User Manual page 95

Epson AcuLaser C9300 Series User's Guide
Unable to store form overlay data on the optional CompactFlash memory. Either the CompactFlash
memory is not installed correctly, or the maximum number of form overlay files has been reached.
Confirm that the optional CompactFlash memory is installed correctly, or delete any form overlay
files you no longer need, and then try storing the new overlay again.
To clear this error, select Clear Warning from the control panel's Reset Menu. For instruction
about accessing the control panel menus, see "How to access the control panel menus" on page 60.
Form Feed
The printer is ejecting paper due to a user request. This message appears when pressing the Start/
Stop button once to make the printer offline, then holding down the Start/Stop button for more than
2 seconds in order not to receive form feed command.
Format Error ROM A
An unformatted ROM module has been inserted.
To clear this error, either press the Start/Stop button or turn off the printer and remove the ROM
module, then reinstall the ROM module. If that fails to clear the error, contact your dealer.
Format Required
The installed CompactFlash memory needs to be formatted to use it with the printer.
Select Yes to format the memory, or select No to cancel formatting. If you select No, CompactFlash
Error is displayed and you cannot use the memory for the printer. In that case, turn off the printer and
remove the CompactFlash memory.
Formatting CF
The CompactFlash memory is being formatted.
Fuser Needed Soon
This message indicates that the fuser unit is near the end of its service life. You can continue to print
until the Replace Fuser message appears.
To clear this warning message and continue printing, select Clear All Warnings from the control
panel's Reset Menu. For instruction about accessing the control panel menus, see "How to access the
control panel menus" on page 60.
Image Optimum
Using the Control Panel 95