Using The Reset Menu; Interrupting Printing - Epson AcuLaser C9300N User Manual

3. Press the d Down or u Up button to select Cancel Job, then press the OK button. Printing is
canceled.
Note:
❏ Select Cancel All Jobs on step 3 to cancel all print jobs in the printer's memory.
❏ The operation is canceled and printing restarts one minute after the printer is not operated.
❏ After canceling jobs is completed, the printer recovers from pause.

Using the Reset menu

Selecting Reset from the control panel's Reset Menu stops printing, clears the print job being
received from the active interface, and clears errors that may have occurred at the interface.
Follow the steps below to use the Reset Menu.
1. Press the r Right button to access the control panel menus.
2. Press the d Down button several times until Reset Menu appears on the LCD panel, then press
the r Right button.
3. Press the d Down button several times until Reset to display.
4. Press the r Right button. Printing is canceled. The printer is ready to receive a new print job.

Interrupting Printing

If the printer is shared, it is possible to interrupt the current print job to print a different print job.
Follow the steps below to use this function.
1. Press the W Pause/Cancel button to stop the current print job.
2. Press the d Down or u Up button to select the job that you want to print, then press the OK
button.
3. Press the d Down or u Up button to select Interrupt Printing, then press the OK button.
Epson AcuLaser C9300 Series
Using the Control Panel
User's Guide
108