Epson AcuLaser C9300N User Manual page 101

Epson AcuLaser C9300 Series User's Guide
The development unit has reached the end of its service life and needs to be replaced. If this error
occurs, consult your dealer.
Replace Feed Roller MP, Replace Feed Roller C1, Replace Feed Roller C2, Replace Feed Roller
C3, Replace Feed Roller C4
The feed roller has reached the end of its service life and needs to be replaced. If this error occurs,
consult your dealer.
Replace Fuser
The fuser has reached the end of its service life and needs to be replaced. If this error occurs, consult
your dealer.
Replace Maintenance Unit
The maintenance unit has reached the end of its service life and needs to be replaced. If this error
occurs, consult your dealer.
Replace Photocon uuuu
The indicated photoconductor unit has reached the end of its service life and need to be replaced. See
"Replacing Consumable Products" on page 133 for instructions.
Replace Toner uuuu
Printing is possible until the printout fades.
To stop the printout from fading, open cover D, make sure the cartridge is locked, and tap the top of
the toner cartridge about five times with your finger. If the fading is not resolved by this procedure,
replace the toner cartridge. See "Replacing Consumable Products" on page 133 for instructions.
Replace Toner uuuu Print in monochrome?
The indicated toner cartridge has reached the end of its service life and need to be replaced. See
"Replacing Consumable Products" on page 133 for instructions.
This message appears only when Convert to Monochrome is set to On, and the black toner is still left.
You can print in black-and-white by pressing the Start/Stop button.
Replace Transfer Unit/Replace 2nd Transfer Unit
The indicated transfer unit has reached the end of its service life and needs to be replaced. If this error
occurs, consult your dealer.
Using the Control Panel 101