Epson AcuLaser C2900N User Manual page 44

1. Turn on the printer.
Ensure that Ready message appears on the LCD panel.
2. On the operator panel, press the
3. Select Admin Menu, and then press the
4. Select Wired Network, and then press the
5. Select TCP/IP, and then press the
6. Select IPv4, and then press the
7. Select Get IP Address, and then press the
8. Select Panel, and then press the
9. Ensure that the message Restart Printer to apply setting appears, and then press any
button.
10. Press the button to select IP Address, and then press the
The cursor is located at the first octet of the IP address.
11. Specify the value of the IP address using the
12. Press the button.
The cursor moves to the next octet.
13. Repeat steps 11 to 12 to set all of the digits in the IP address, and then press the
14. Ensure that the message Restart Printer to apply setting appears, and then press any
button.
15. Press the button to select Subnet Mask, and then press the
The cursor is located at the first octet of the subnet mask.
16. Specify the value of the subnet mask using the
17. Press the button.
Epson AcuLaser C2900 Series
(Menu) button.
button.
button.
button.
button.
button.
button.
or button.
or button.
User's Guide
button.
button.
button.
Network Basics 44