Values:
On*
Off
Hex Dump
Purpose:
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is
printed in hexadecimal and character representation. Control codes are not executed.
Values:
Disable*
Enable
Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when you print in the draft
mode.
Values:
Disable*
Enable
LineTermination
Purpose:
To add the line termination commands.
Values:
Off*
Add-LF
Enables the Image Enhance feature.
Disables the Image Enhance feature.
Disables the Hex Dump feature.
Enables the Hex Dump feature.
Does not print in the draft mode.
Prints in the draft mode.
The line termination command is not added.
CR=CR, LF=LF, FF=FF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
Epson AcuLaser C2900 Series
Using the Operator Panel Menus
User's Guide
112