Epson AcuLaser C2900N User Manual page 130

Adjust ColorRegi
Purpose:
To manually perform color registration adjustment.
Manual Color Registration Adjustments are required when the printer is initially installed and after
the printer is moved.
Note:
The Adjust ColorRegi feature can be configured when Auto Adjust Regi is set to Off.
Values:
Auto Adjust
ColorRegi Chart
Enter Number
Note:
Ensure that you remove the paper from the single sheet feeder (SSF) before performing Auto Adjust.
Clean Developer
Purpose:
To stir the toner in a new toner cartridge.
Automatically performs color registration correction.
Prints a color registration chart. The color registration chart prints a
lattice pattern of yellow, magenta, and cyan lines. On the chart, find the
values on the right side that are next to the line that is perfectly straight
for each of the three colors. If the value for this line is 0, color registration
adjustment is not required. If the value for this line is any value other
than 0, specify the adjustment values for lateral adjustment and process
adjustment under Enter Number.
LY -9 to +9 Sets lateral (perpendicular to paper feed direction) and process (paper
feed direction) color adjustment values individually for Yellow,
LM
Magenta, and Cyan. Enter a number in order of lateral adjustment (left),
lateral adjustment (right), and process adjustment. Press the
LC
button to save all the settings.
RY -9 to +9
RM
RC
PY -9 to +9
PM
PC
Epson AcuLaser C2900 Series
Using the Operator Panel Menus
User's Guide
130