Epson AcuLaser C2900N User Manual page 195

Message
Waste Full
Black Cartridge
Insert
Drum Cartridge
XXXXXXXXXXXXXXXX
CTD Sensor
Check Unit
CTD Sensor
Low Density
Yellow Cartridge
Low Density
MagentaCartridge
Low Density
Cyan Cartridge
Low Density
Black Cartridge
Blk - CRUM Error
Restart Printer
Error 093-925
Restart Printer
Invalid Black
Y - CRUM Error
Restart Printer
Error 093-950
Restart Printer
What You Can Do
Open the side cover. Remove the used black cartridge, and install a new car-
tridge.
Open the front cover, and make sure that the drum cartridge is fully installed.
Clean the CTD sensor.
Remove and shake the yellow cartridge. Contact customer support if this failure
is repeated.
Remove and shake the magenta cartridge. Contact customer support if this
failure is repeated.
Remove and shake the cyan cartridge. Contact customer support if this failure is
repeated.
Remove and shake the black cartridge. Contact customer support if this failure is
repeated.
Turn off the printer. Confirm the black cartridge is correctly installed, and turn
on the printer. Contact customer support if this failure is repeated.
Open the side cover. Remove the unsupported black cartridge, and install a
supported cartridge.
Turn off the printer. Confirm the yellow cartridge is correctly installed, and turn
on the printer. Contact customer support if this failure is repeated.
Epson AcuLaser C2900 Series
Troubleshooting
User's Guide
195