Setting Up For Shared Printing - Epson AcuLaser C1750N User Manual

d Select Connect to a network.
e Select the network, and then click Connect.
f Click Close in the dialog box after confirming the connection is a success.
For Windows Server 2008 R2 and Windows 7:
a Display Control Panel.
b Select Network and Internet.
c Select Network and Sharing Center.
d Select Connect to a network.
e Select the network, and then click Connect.

Setting Up for Shared Printing

You can share your new printer on the network using the Software Disc that shipped with your printer,
or using Windows Point and Print or peer-to-peer method. However, if you use either of the Microsoft
methods you will not get features such as the Status Monitor and other printer utilities, which will get
installed with the Software Disc.
If you want to use the printer on a network, share the printer and install its drivers on all the computers
on the network.
Note:
You need to purchase a Ethernet cable separately for shared printing.
For Windows XP, Windows XP 64-bit Edition, Windows Server 2003, and Windows Server
2003 x64 Edition
1. Click Start (start for Windows XP) — Printers and Faxes.
2. Right-click this printer icon and select Properties.
3. From the Sharing tab, select Share this printer, and then enter a name in the Share name text
box.
Epson AcuLaser C1750 Series
Network Basics
User's Guide
74