Maintenance Mode - Epson AcuLaser C1750N User Manual

Values:
Off
On*

Maintenance Mode

Use the Maintenance Mode menu to initialize Non-Volatile Memory (NVM), configure the plain
paper quality adjustment settings, and configure the security settings.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
F/W Version
Purpose:
To display the version of the controller.
Adjust PaperType
Purpose:
To adjust the paper type.
Values:
Plain
Labels
Adjust BTR
Purpose:
To specify the optimum voltage settings for printing for the transfer roller (BTR). To lower the voltage,
set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. If you see mottles on the print
output, try to increase the voltage. If you see white spots on the print output, try to decrease the
voltage.
Does not show the alert message when the toner is low.
Shows the alert message when the toner is low.
Light
Normal*
Light
Normal*
Epson AcuLaser C1750 Series
Using the Operator Panel Menus
User's Guide
142