Setting Up For Shared Printing (Epson Aculaser Mx14Nf Only) - Epson AcuLaser MX14 User Manual

b If you want other users on the network to access this printer, select Share this printer with
other computers on the network, and then enter a share name that users can identify.
c If you want to set a printer as the default for printing, select the Set this printer as default
for printing check box.
d If you want to set a printer as the default for scanning, select the Set this printer as default
for scanning check box.
e If you want to install the fax driver, select the FAX Driver check box.
8. Select the software and documentation you want to install, and then click Install. You can specify
folders in which to install the software and documentation. To change the folders, click
Browse.
9. Click Finish to exit the wizard.

Setting Up for Shared Printing (Epson AcuLaser MX14NF Only)

You can share your new printer on the network using the Software Disc that shipped with your printer,
or using Windows Point and Print or peer-to-peer method. However, if you use either of the Microsoft
methods you will not get features such as the Status Monitor and other printer utilities, which will get
installed with the Software Disc.
If you want to use the printer on a network, share the printer and install its drivers on all the computers
on the network.
Note:
You need to purchase a Ethernet cable separately for shared printing.
For Windows XP, Windows XP 64-bit Edition, Windows Server 2003, and Windows Server
2003 x64 Edition
1. Click Start (start for Windows XP) — Printers and Faxes.
2. Right-click this printer icon and select Properties.
3. From the Sharing tab, select Share this printer, and then enter a name in the Share name text
box.
Epson AcuLaser MX14 Series
Printer Connection and Software Installation
User's Guide
54