To verify if the printer is active on the network, run the ping command in your computer:
1. Click start, and select Run.
2. Enter cmd, and then click OK.
A black window is displayed.
3. Enter ping xx.xx.xx.xx (where xx.xx.xx.xx is the IP address of your printer), and then press the
Enter key.
4. Reply from the IP address denotes printer is active on the network.
See Also:
"Printing and Checking the Printer Settings Page" on page 33
Printing and Checking the Printer Settings Page
Print the Printer Settings page and check your printer's IP address.
The Operator Panel
1. Press the
(Menu) button.
2. Select Information Pgs, and then press the
3. Select Printer Settings, and then press the
The Printer Settings page is printed.
4. Confirm the IP address next to IP Address under Network Setup on the Printer Settings page. If
the IP address is 0.0.0.0, wait for a few minutes to resolve the IP address automatically, and then
print the Printer Settings page again.
If the IP address is not resolved automatically, see "Assigning an IP Address (for IPv4 Mode)" on
page 30.
The Printer Setting Utility
The following procedure uses Windows XP as an example.
Epson AcuLaser C1750 Series
button.
button.
User's Guide
Network Basics
33