Non Genuine Toner Mode; The Operator Panel; The Printer Setting Utility - Epson AcuLaser C1750N User Manual

Non Genuine Toner Mode

When toner within a toner cartridge is end of its service life, the Replace XXXX Cartridge or Empty
XXXX Cartridge (XXXX: Yellow, Magenta, Cyan, or Black) message appears.
When you want to use the printer in the Non Genuine Toner mode, enable the Non Genuine Toner
mode and replace the toner cartridge.
Important:
If you use the printer in the Non Genuine Toner mode, the performance of the printer may not be at its
optimum. And any problems that may arise from the use of the Non Genuine Toner mode are not
covered by our quality guarantee. The continuous use of the Non Genuine Toner mode can also cause the
printer to break down, and any repair charges for such break down will be incurred by users.
Note:
To disable the Non Genuine Toner mode, select Off for Non-GenuineToner on the operator panel or
deselect the check box next to On on the Non Genuine Toner page on the Printer Setting Utility.

The Operator Panel

Note:
Before starting the operation described below, confirm that Ready is displayed on the LCD panel.
1. Press the (Menu) button.
2. Select Admin Menu and then press the
3. Select Maintenance Mode and then press the
4. Select Non-GenuineToner and then press the
5. Select On and then press the
6. Press the button until the top page is displayed.
The printer switches to the Non-GenuineToner mode.

The Printer Setting Utility

The following procedure uses Windows XP as an example.
button.
button.
button.
button.
Epson AcuLaser C1750 Series
Troubleshooting
User's Guide
194