Receiving Faxes Manually - Epson WorkForce WF-3520DWF User Manual

User's Guide
Note:
When you receive a call and the other party is a fax, the product receives the fax automatically even if the answering machine
picks up the call. If you pick up the phone, wait until the LCD screen displays a message saying that a connection has been
made before you hang up. If the other party is a caller, the phone can be used as normal or a message can be left on the
answering machine.

Receiving faxes manually

If your phone is connected to the product, and Auto Answer mode has been set to Off, you can receive fax data after the
connection is made.
Note:
❏ Depending on the Fax Output settings, the received fax is saved as data or printed.
"Changing Fax Output setting to print" on page 86
&
❏ If Fax Output is set to Save, the received fax data is automatically saved as data, and you can skip step 1.
A
Load plain paper in the cassette.
"Loading Paper into the Paper Cassette" on page 24
&
Note:
If your product is equipped with two cassettes, make Paper Source settings.
Setup > Fax Settings > Receive Settings > Paper Source
If you want to print a large quantity of faxes in a single batch, load plain paper in both cassettes and set Paper Source
to Cassette 1>Cassette 2.
B
When the telephone rings, lift the phone connected to the product.
C
When you hear a fax tone, select Receive on the control panel of the product.
D
Press one of the x buttons to start receiving the fax, and then put the phone back on the hook.
Note:
If Fax Output is set to Save, the received fax data is automatically saved as data, and you do not have to proceed to
step 5.
E
Press one of the x buttons to print your faxes.
Faxing
92