Using The Wizard To Establish A Connection - Canon Wireless File Transmitter WFT-E7A Instruction Manual

Using the Wizard to Establish a Connection

Selecting the Wireless Network
When you select [Connect with wizard], active wireless LAN terminals in your area are listed,
accompanied by their respective information. Select the SSID (or ESS-ID) of your desired
wireless LAN terminal.
1 2 3
1 Indicates whether the device is in infrastructure or ad hoc mode
2 An icon is displayed if the wireless LAN terminal uses encrypted communication
3
Indicates the first 9 characters of the SSID
4
Indicates the channel used
Encryption by Wireless LAN Terminals
If the wireless LAN terminal uses encrypted communication, select the corresponding method
in [Authentication] and [Encryption].
[Authentication]: Open system, Shared key, WPA-PSK, or WPA2-PSK
[Encryption]: WEP, TKIP, or AES
[Enter connection] and [Search again]
To configure settings for the wireless LAN terminal manually, select [Enter connection] and
press <0>. Complete the settings following the procedure displayed.
To search for wireless LAN terminals again, select [Search again] and press <0>.
Select [Connect with wizard].
1
Turn the <5> dial to select [Connect with
wizard], and then press <0>.
Select the wireless LAN terminal.
4 2
To select the wireless LAN terminal, press <0>.
Turn the <5> dial to select the wireless LAN
terminal, and then press <0>.
Select [OK] and press <0> to go to the next
screen.
23