Virtual Keyboard Operation
The virtual keyboard is displayed when entering the encryption key, server name, and other
information.
Switching between input areas
To switch between input areas, press the <Q>
button.
Moving the cursor
To move the cursor, turn the <5> dial.
You can also move the cursor using <9>.
Entering text
In the bottom input area, turn the <5> dial to move
the cursor and press <0> to enter text.
You can also move the cursor using <9>.
You can check how many characters you have
entered by referring to [*/5] in the upper-right corner of
the screen.
Deleting text
If you make a mistake, press the <L> button to erase
characters.
Confirming entries
Press the <7> button to confirm what you have
entered and go to the next screen.
Canceling entries
Press the <6> button to erase the entry and
return to the previous screen.
Configuring Network Settings
29