Installing And Removing The Battery - Canon Wireless File Transmitter WFT-E7A Instruction Manual

Installing and Removing the Battery

Use one Battery Pack LP-E6 to power the transmitter. When replacing the transmitter's battery,
be sure to turn the transmitter off before opening the battery compartment cover.
Also note that the transmitter is not sold with a battery or charger. If you do not own these
accessories, they are available for purchase separately.
Installing the battery
Open the cover.
1
Push the lever down and open the cover.
Insert the battery.
2
Insert the end with the battery contacts.
Insert the battery all the way until it locks into
place.
Close the cover.
3
Press the cover up until it clicks into place.
11