Canon Wireless File Transmitter WFT-E7A Instruction Manual page 110

Handling Error Messages
71: Cannot connect to slave camera
Are you following the correct procedure to establish the connection with slave
cameras?
Operate slave cameras by following the correct instructions (p.70, 71).
Are the slave cameras too far from the master camera?
Bring the slave cameras closer to the master camera.
72: Cannot connect to master camera
Are you following the correct procedure to establish the connection with master
camera?
Operate the master camera by following the correct instructions (p.70, 71).
Is the master camera too far from the slave cameras?
Bring the master camera closer to the slave cameras.
73: Could not synchronize the time
Are you following the correct procedure to establish a connection between the
master and slave cameras?
Operate the master and slave cameras by following the correct instructions (p.91, 92).
Are the master and slave cameras too far apart?
Bring the master and slave cameras closer together.
81: Wired LAN connection lost
Is the LAN cable securely connected?
Reconnect the LAN cable between the camera and server. Because the cable may be
severed, try using another cable to connect the devices.
Is the hub or router on?
Turn on the hub or router.
Is the server on?
Turn the server on. The server may have been turned off because of an energy-saving
mode.
91: Other error
An error other than error number 11 to 81 has occurred.
Turn the camera's power switch off and on.
110