Table of Contents
Advertisement
The EOS Utility network settings are now complete.
Configuring EOS Utility Communication Settings
Double-click the pairing software icon.
3
Detected cameras are listed. If a camera is
already connected, it is not displayed in the list.
Click [Connect].
If multiple cameras are displayed, identify the
camera to connect to by its [MAC address] or [IP
address].
You can check the [MAC address] and [IP
address] by accessing [Confirm settings] in the
menu (p.84).
When the camera detects the computer on which
4
you clicked [Connect] in step 3, the message on
the left is displayed.
Turn the <5> dial to select [OK], and then press
<0>.
Press <0> and turn the <5> dial to select the
5
set number, and then press <0>.
After you turn the <5> dial to select [OK] and
press <0>, the connection wizard closes and
EOS Utility starts up.
The <LAN> lamp on the transmitter lights up green.
Settings information is stored on the camera. It is
not stored on the transmitter.
49
Hide quick links:
Advertisement
Table of Contents
