Remove The Battery - Canon Wireless File Transmitter WFT-E7A Instruction Manual

Installing and Removing the Battery
Battery check
The remaining battery power is displayed when you turn the transmitter on. A blinking battery
icon ( ) indicates that the battery will be depleted soon.
Icon
Level (%) 100 – 70
Number of images that can be transferred
LAN At Normal Temperature (23°C / 73°F)
Wireless LAN
Wired LAN
When using a fully charged LP-E6. The number of images that can be transferred is nearly
the same at normal temperature (23°C / 73°F) and low temperature (0°C / 32°F).
When automatic transfer is performed during shooting of an image of approx. 5 MB under
conditions based on the CIPA (Camera & Imaging Products Association) test standards.
Fewer images can be transferred when transferring images continuously over a wireless
LAN.
Removing the battery
12
69 – 50 49 – 20
2400
2200
Open the cover.
1
Push the lever down and open the cover.

Remove the battery.

2
Press the battery lock lever in the direction of the
arrow to unlock, and then remove the battery.
To prevent a short-circuit, be sure to always attach
the protective cover to the battery.
19 – 10 9 – 1
Approx. number of images
At Low Temperature (0°C / 32°F)
2300
2200
0