Canon Wireless File Transmitter WFT-E7A Instruction Manual page 60

Remote Capture [Camera control]
⑯
60
Set the lens focus mode switch to
2
<f>.
Click the release button (⑤). When you let go of
the button, the camera autofocuses and the
picture is taken.
With One-Shot AF, the picture is not taken if focus
is not achieved. Display the Live View image and
focus manually as described in the next steps.
Display the Live View image.
3
Click the Live View shooting button (⑯).
The AF/MF switch (⑥) is set to <g>, and the
Live View image is displayed.
⑱ If the Live View image is not displayed, enable
Live View shooting in the menu (⑮).
To make the Live View image display more
responsive, click the Live View image size
switching button (⑱). The Live View image will be
displayed at a smaller size, improving
responsiveness. To restore the original size, click
the button again.
Manually adjust the focus.
4
Click the buttons <
<
autofocus is not supported during the Live View
image display.
To focus more closely, click <
<
<
Three levels of focus adjustment are available.
<
<
<
>, <
>, and < > to adjust the focus. Note that
>. To focus farther away, click <
>, or < >.
> < > : Largest increment
> < > : Intermediate increment
> < > : Smallest increment
>, < >, < >,
>, < >, or
>,