Table of Contents
Advertisement
9.
Remove the SATA/SAS cables from
the onboard SATA1–3 connectors.
10. Connect the SATA/SAS cables
to the SAS1–3 connectors on the
PIKE riser card.
11. Align the riser card bracket to
the PCI Express x16 slot on the
motherboard.
12. Press the riser card bracket until
the golden fingers completely fit the
slot and the bracket aligns with the
rear panel.
13. Ensure that the SGPIO_SEL
jumper in front of the server node is
set to pin 2–3.
ASUS RS720QA-E6/RS12, RS724QA-E6/RS12
2-23
Advertisement
Table of Contents
