Table of Contents
Advertisement
3.2.1
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section 3.7 Boot memu for details.
Displays the CPU/motherboard temperature,
CPU/5V/3.3V/12V voltage output,
CPU/CPU_OPT/Chassis fan speed
Quick switch to frequently
used menus.
Selects the boot device priority
Displays the system properties of the
selected mode on the right hand side
•
•
3-2
Selects the display language of
the BIOS setup program
Power Saving mode
The boot device options vary depending on the devices you installed to the system.
The Boot Menu(F8) button is available only when the boot device is installed to the
system.
Exits the BIOS setup program without saving
the changes, saves the changes and resets
the system, or enters the Advanced Mode
Loads optimized default
Normal mode
Selects the boot device priority
Chapter 3: BIOS setup
Clicks to display all fan
speeds if available
ASUS Optimal mode
Hide quick links:
Advertisement
Table of Contents
