Table of Contents
Advertisement
6.
USB 2.0 connectors (10-1 pin USB78, USB910, USB1112, USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
®
SABERTOOTH X79
SABERTOOTH X79 USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and
then install the Q-Connector (USB) to the USB connector onboard if your chassis supports
front panel USB ports.
7.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s).
Connect the S/PDIF Out module cable to this connector, then install the module to a
slot opening at the back of the system chassis.
®
The S/PDIF module is purchased separately.
ASUS SABERTOOTH X79
USB78
USB910
PIN 1
PIN 1
USB1112
USB1314
PIN 1
PIN 1
2-21
Hide quick links:
Advertisement
Table of Contents
