Pch Scu Sas Configuration - Asus ESC2000 G2 User Manual

Aggressive Link Power Management [Enabled]
Configuration options: [Enabled] [Disabled]
Port 1-6 Staggered Spin-up [Disabled]
Configuration options: [Enabled] [Disabled]
IDE Mode
Allows you to to enable or disable the SATA controllers.
Serial-ATA Controller 0 [Enhanced]
This item appears only when you set the SATA Mode item to [IDE Mode]. Set to
[Enhanced] to support two SATA 6.0 Gb/s and two SATA 3.0 Gb/s devices. Set to
[Compatible] when using Windows 98/NT/2000/MS-DOS. Up to four SATA devices
are supported under these operating systems.
Configuration options: [Disabled] [Enhanced] [Compatible]
Serial-ATA Controller 1 [Enhanced]
This item appears only when you set the SATA Mode item to [IDE Mode]. Set to
[Enhanced] to support two SATA 3.0 Gb/s devices.
Configuration options: [Disabled] [Enhanced]
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor
system. When read/write of your hard disk errors occur, this feature allows the hard
disk to report warning messages during the POST.
Configuration options: [Enabled] [Disabled]
4.5.5 PCH SCU SAS Configuration
The PCH SCU SAS configuration items appears only when you have installed the ASRK
Module (optional) on the motherboard.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Device1
Device2
Device3
Device4
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
ASUS ESC2000 G2
Advanced
Not Present
Not Present
Not Present
Not Present
→←: Select Screen
Select Item
↑↓:
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
4-27