Table of Contents
Advertisement
2.
Firmly hold the tray lever and pull the
drive tray out of the bay.
3.
Take note of the drive tray holes. Each
side has three holes to fit different types
of hard disk drives. Use two screws on
each side to secure the hard disk drive.
4.
Place a SATA hard disk drive on the tray,
and then secure it with four screws.
5.
Carefully insert the drive tray and push
it all the way to the depth of the bay until
just a small fraction of the tray edge
protrudes.
When installed, the SATA connector on the drive connects to the SATA interface on the
backplane.
ASUS ESC2000 G2
2-17
Advertisement
Table of Contents
