3.
Hold the DIMM by both of its ends,
then insert the DIMM vertically into
the socket. Apply force to both ends
of the DIMM simultaneously until the
retaining clip snaps back into place,
and the DIMM cannot be pushed in
any further to ensure proper sitting of
the DIMM.
Always insert the DIMM into the socket VERTICALLY to prevent DIMM notch damage.
2.4.4
Removing a DIMM
1.
Press the retaining clip outward to
unlock the DIMM.
2.
Remove the DIMM from the socket.
Support the DIMM lightly with your fingers when pressing the retaining clip. The DIMM
might get damaged when it flips out with extra force.
2-12
3
Locked Retaining Clip
2
Chapter 2: Hardware setup
3
1