Table of Contents
Advertisement
5.4
Intel
enterprise Utility (Windows)
The Intel
Rapid Storage Technology enterprise utility allows you to create RAID 0, RAID 1,
®
RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected
to the Serial ATA connectors supported by the Southbridge.
Before you using Intel
setting first:
1.
Enter the BIOS Setup during POST.
Go to the Advanced Menu > Chipset Configuration > PCH Configuration>
2.
Onboard SATA Oprom, then press <Enter>.
Set Onboard SATA Oprom to [Enabled].
3.
4.
Press <F10> to save your changes and exit the BIOS Setup.
You need to manually install the Intel
Windows
To enter the Intel
®
Rapid Storage Technology enterprise utility under Windows operating
system:
1.
Turn on the system to Windows desktop.
Click the Intel
2.
®
Your storage system is configured for data protection, increased performance and
optimal data storage capacity. You can further optimize your storage system by creating
additional volumes.
You can click Rescan to re-scan any attached hard disks.
ASUS ESC2000 G2
®
Rapid Storage Technology
®
Rapid Storage Technology enterprise utility, you need to change BIOS
®
operating system. Please refer to the installation instructions in Chapter 6.
Rapid Storage Technology enterprise icon to display the main menu.
Rapid Storage Technology enterprise utility on a
®
5-37
Advertisement
Table of Contents
