Reversing
Door
Reversing
door
C) Reversing
Hardware
on Front Panel
1 Remove 2 short, course-thread,
panhead
screws from striker and 2 plastic hole plugs.
Rotate striker and move to opposite
opening. Attach with 2 short, course-thread,
panhead screws.
3
Install original plastic hole plugs or use new
plugs supplied with dryer.
D) Removing
Door Hardware
1 Remove 2 long, course-thread,
counter-sunk
screws and latch plate. Set latch aside.
Remove 4 long, course-thread,
recessed
screws and hinge. Set hinge aside.
\
\