Table of Contents
Advertisement
installation
instructions
FIRE HAZARD
Before operating the dryer, make sure the dryer
area is clear and free of combustible materials,
gasoline, and other flammable vapors, Also
see that nothing (such as boxes, clothing, etc.)
obstructs the flow of combustion and ventilation air.
-
,j
If your dryer has this console:
1. Empty the dryer drum.
On gas dryers, before the burner will light, it is
necessary for the gas line to be bled of a_r.If the
burner does not light within 45 seconds the first
time the dryer is turned on, the safety switch will
shut the burner off. If this happens, press cancel
and wait 5 minutes before making another
attempt to light.
o'3c
:
:
:
@
O
O
o
2.After you plug in the dryer the first time: wake up the dryer by pressing any button, rotate cycle knob
to touch up cycle, press the start button and then the cancel button.
3.Wake up the dryer again by pressing any button, then immediately and simultaneously
press and hold
both the sanitize
and my favorite
buttons for 5 seconds, or until the LCD display changes.
4.The LCD window will display llISTRLC21CL_ and show estimated time of cycle completion.
Press the
start button. The Installation Cycle will automatically
test for correct cord connection
(on electric mod-
els) and presence of gas supply (on gas models). At cycle completion,
the LCD window may display
II",STRL P RSFJ, m eaning your new dryer is properly installed and ready for use. If it prompts an action
such as S_R(/_C_ C ORO, II0 L-,RS or S_,LLS_{IlC_ 877 ff35 3_87, review the installation steps and make the
necessary corrections before you attempt to use the dryer.
5.Your dryer will exit the Installation Cycle and return to normal operation the next time you wake it up.
Dryer will stay awake for 3 minutes after the Installation Cycle. If you wish to
immediately run the dryer through a drying cycle, press the cancel button to put the
unit to sleep and then rewake it immediately to continue the normal operating mode.
6. Please read the Use & Care Guide and enjoy your new premium dryer!
If your dryer has this console:
l
1 .After you plug in the dryer the first time: wake up the dryer by
pressing
any button and follow the
prompts
on the LCD User Interface,
including
language
selection.
2.The Installation
Cycle will automatically
test for correct cord connection
(on electric models),
pres-
ence of gas supply (on gas models) and free flow of exhaust
vent. At cycle completion,
the LCD user
interface may display II",STRL PRSS;,meaning your new dryer is properly installed and ready for use. If
it prompts an action such as S__-_(/IC_ CO°,O, I '_05RS or CRLL.c__-_(/IC_
877 u,353287, review the installation
steps and make the necessary corrections before you attempt to use the dryer.
3.Your dryer will exit the Installation Cycle and return to normal operation the next time you wake it up.
Dryer will stay awake for 3 minutes after the Installation Cycle. If you w_sh to
immediately run the dryer through a drying cycle, press the cancel button to put the
unit to sleep and then rewake it _mmediately to continue the normal operating mode.
4. Please read the Use & Care Guide and enjoy your new premium dryer!
Advertisement
Table of Contents
