Connecting A Video Source To The Av2 (Side Panel) Input; Connecting A Video Source To The Component Input; To Audio Out; To Component Video Out - Dynex DX-R24TV User Manual

Setting up your television

Connecting a video source to the AV2 (side panel) input

TV side
panel
To view the AV2 video input, press INPUT on the remote repeatedly until AV2 appears on the
screen.

Connecting a video source to the COMPONENT input

If your DVD player has component video out jacks, connect your television to a DVD player
using a component video cord. It can greatly enhance picture quality and performance.
Note: This television can only receive Y Cb Cr (not Y Pb Pr) signals through the Component input.
TV back panel

To Audio OUT

To Audio/
Video IN
Audio/ Video cord (not supplied)
( 1 )
To Component video IN
Component video cable
(not supplied)
R
W
L R
AUDIO OUTPUT
Video equipment
R
Signal
G
B
R
Audio cord (not supplied)
To Component
B
R G
video OUT
C C
Y
r b
COMPONENT OUTPUT
DVD player
Y
W
To Audio/
Video OUT
w
R
To Audio IN
15