Ethernet Configuration
Make the following network settings according to the network interface you are
using.
You can use SmartDeviceMonitor for Admin or a Web browser to make IP ad-
dress-related settings in a TCP/IP-capable environment.
Important
❒ Configure the printer for the network using the control panel.
❒ The following table shows the control panel settings and their default values.
These items appear in the "Host Interface" menu.
Setting Name
Auto– Obtain (DHCP)
IPv4 Address
Subnet Mask
Gateway Address
Frame Type (NW)
Effective Protocol
Ethernet Speed
LAN Type
Note
❒ If [Auto-Obtain (DHCP)] is in use, the IP address, subnet mask, and gateway ad-
dress are all set automatically.
❒ Make this setting only when it is necessary. See Software Guide.
4. Configuration
On
011.022.033.044
000.000.000.000
000.000.000.000
Auto
• IPv4:
Effective
• IPv6:
Effective
• NetWare:
Effective
• SMB:
Effective
• AppleTalk:
Effective
Auto
Auto
Value
63