Ricoh C410DN - Aficio SP Color Laser Printer Hardware Manual page 54

Installing Options
D
Fully insert the USB host interface board.
2
E
Tighten the two screws to secure the USB host interface board.
Check the USB host interface board is inserted firmly to the controller board.
Note
❒ After finishing installation, check the USB host interface board is installed
properly: print the configuration page from the [List/Test Print] menu. If it
is installed properly, you will see "USB Host" for "Device Connection" on
the configuration page.
❒ If the USB host interface board is not installed properly, reinstall it follow-
ing this procedure. If you cannot install it properly even after attempting
reinstallation, contact your sales or service representative.
❒ You can connect the USB cable from a digital camera to the USB host inter-
face board. For details, see p.59 "Connecting a digital camera", or Software
Guide.
Reference
For details about printing the configuration page, see "Test Printing",
Quick Installation Guide.
42
AQC042S
AQC044S