Ricoh C410DN - Aficio SP Color Laser Printer Hardware Manual page 43

I
Connect the flat cable to the hard disk drive and the controller board. Con-
nect the blue end of the flat cable to the controller board.
J
When installing other options on the controller board, do not close the con-
troller board, but go to the steps for installing the option.
K
Fasten the four screws to attach the cover.
L
Align the controller board with the left and right rails, and then push it
carefully in, until it stops.
Push only on the area of the controller board that is marked "PUSH". Push in
the controller board until it can go no further.
The printer may malfunction if the controller board is not properly installed.
AQC0006S
AQC700S
AQC710S
Attaching Hard Disk Drive Type 4000
2
31