Installing Options
F
With the "INSERT" side facing you, slowly insert the card into the Blue-
tooth interface unit until it stops.
2
G
Press the antenna to extend it.
H
Holding the antenna cap with the two cut-off corners toward you, fit the
cap over the card.
Note
❒ After finishing installation, you can check the Bluetooth interface unit is
properly installed: Print the configuration page from the [List/Test Print]
menu. If it is installed properly, "Bluetooth" will appear for "Device Con-
nection" on the configuration page.
❒ If the Bluetooth interface unit is not installed properly, reinstall it follow-
ing this procedure. If you cannot install it properly even after attempting
reinstallation, contact your sales or service representative.
Reference
For printing the configuration page, see "Test Printing", Quick Installation Guide.
38
AQC099S
AQC100S
AET101S