16
S e tt i n g U p
Swapping Devices While Windows Is Running
In Microsoft Windows Millennium Edition (Me)
Right-click the Softex BayManager icon on the Microsoft Windows
1
taskbar.
Click Remove/Swap.
2
Detach the media bay cable from the external media bay.
3
Turn the external media bay over.
4
Slide and hold the latch release, and pull the device out of the media
5
bay.
Insert the new device into the bay, and push it until you hear a click.
6
Attach the media bay cable to the external media bay.
7
Click OK. Then, click OK again to close the Softex BayManager
8
window.
In Microsoft Windows 2000
Double-click the Unplug or Eject Hardware icon on the Microsoft
1
Windows taskbar.
Click the device you want to eject and then click Stop.
2
Click OK and wait until the device you want to eject is cleared from
3
the list of devices in the Unplug or Eject Hardware window.
Detach the media bay cable from the external media bay.
4
Turn the external media bay over.
5
Slide and hold the latch release, and pull the device out of the media
6
bay.
Insert the new device into the bay, and push it until you hear a click.
7
Attach the media bay cable to the external media bay.
8
When Windows recognizes the new device, click Close.
9