Swapping Devices While Windows Is Running - Dell Inspiron 8000 Solution Manual

NOTICE:
Insert devices before you dock and turn on the computer.
Insert the new device into the bay, and push it until you hear a click.
5
Turn on the computer.
6

Swapping Devices While Windows Is Running

NOTICE:
To prevent irreparable damage to the docking connector, do not
replace devices while the computer is connected to an APR.
In Microsoft Windows Me
Right-click the Softex BayManager icon on the Microsoft Windows
1
taskbar.
Click Remove/Swap.
2
Keep the display open, and tilt the computer back so that you can
3
access the bottom of the computer.
Slide and hold the latch release, and pull the device out of the media
4
bay.
Insert the new device into the bay, and push it until you hear a click.
5
Click OK. Then click OK again to close the Softex BayManager
6
window.
In Microsoft Windows 2000
Double-click the Unplug or Eject Hardware icon on the Microsoft
1
Windows taskbar.
Click the device you want to eject and then click Stop.
2
Click OK, and wait until the device you want to eject is cleared from
3
the list of devices in the Unplug or Eject Hardware window.
Keep the display open, and tilt the computer back so that you can
4
access the bottom of the computer.
Slide and hold the latch release, and pull the device out of the media
5
bay.
Insert the new device into the bay, and push it until you hear a click.
6
When Windows recognizes the new device, click Close.
7
19
Sett ing Up