HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note page 11

This feature significantly changes the normal behavior of the fabric. Devices will
have no warning when zones change and will not automatically update their
zoning information. The ability to suppress RSCNs is disabled (check box is not
selected) by default. This feature can be configured through HA-Fabric Manager
(HAFM), Embedded Web Server (EWS), and the Command Line Interface (CLI).
Embedded Web Server (EWS) Changes
With firmware version 05.01.00-24. the EWS now provides support for
configuration of Port Binding. The zoning interface has also been enhanced to
allow you to easily add members to a zone that are not directly attached to the
locally managed switch. You are presented with a list of all devices that are logged
in to the fabric. You can select these devices for addition to a zone.
Command Line Interface (CLI) Changes
CLI has been enhanced to provide the following benefits:
SNMP Changes
Firmware version 05.01.00-24 supports the following management information
base (MIB) versions on all products:
HA-Fabric Manager Release Notes
Access to symbolic name information in the name server database.
Counter Threshold Alerts (CTA)—Used to configure limits and alerts for
any of the supported port statistics fields. You can configure alerts for
individual ports, groups of ports, or various port types, based on
user-specified counter value exceeded over a specified time duration.
Note: The CTA configuration is cleared upon downgrade to firmware below
05.01.00.
Fabric Element MIB: V1.1
MIB-II MIB: RFC-1213, non-implemented sections are not included
FCEOS MIB: V2.0
SNMP Framework MIB: RFC-2271 (1997/09/30)
FA MIB: V3.1
Important Information
11