Important Information
SNMP Changes
Firmware Version 05.02.00-13 supports the following management information
base (MIB) versions on all products:
Zoning Limitations
Firmware Version 05.02.00-13 includes the ability to configure large zone sets,
including up to 1024 zones and 1024 end ports in a single zone set.
the supported limits for the edge switches and directors.
Note:
conforming to zoning rules will be restricted to their assigned zones.
Table 2: Zoning Parameters Supported Limits
Number of end ports
Unique zone members
Members per zone
Zones
Number of zone sets
Maximum devices supported
Note:
32 characters. On all edge switches and directors except the Director 2/140, the
maximum number of zones decreases if full 64 character names are used. The
supported limits are based on two members per zone.
16
Fabric Element MIB: V1.1
MIB-II MIB: RFC-1213, non-implemented sections are not included
FCEOS MIB: V2.0
SNMP Framework MIB: RFC-2271 (1997/09/30)
FA MIB: V3.1
Hard Zoning will be enforced upon firmware initialization. Devices not
Zoning Parameter
The supported number of zones is based on a zone name with a maximum of
Maximum Value
1024
1024
1024
1024
64
1024
Edge Switch Release Notes
Table 2
shows