Supported Configurations - HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note

Supported Configurations

Supported Configurations
Operation of multiple switches in a fabric topology is subject to the following
topology limits. Consider the impact of these limits when planning the fabric.
Note:
SAN High Availability Planning Guide
8
— AA-RU5JA-TE – (HP StorageWorks Director and Edge Switch Glossary)
Firmware
— HPQ_HAF_v05.01.00-24.bin – (HP StorageWorks edge switch preloaded
Firmware)
— HPQ_HAF_v05.02.00-13.bin – (HP StorageWorks edge switch
Firmware)
— firmwareupdate.txt – (Instructions for updating Firmware)
Acrobat
— RP505ENU.EXE – (Windows installation file for Acrobat Reader 5.0
with Search)
For more information about planning the fabric, refer to
Fabric Elements – Each fabric element is defined by a unique domain ID that
ranges between 1 and 31; therefore, the theoretical limit of interconnected
switches in a single fabric is 31. The supported limit of interconnected
switches in a single fabric is 24. Because this number is subject to change,
contact your HP authorized service representative for the current number of
interconnected switches supported in a single fabric.
Inhomogeneous fabric – To determine if interoperability is supported for a
product, or if restrictions apply, refer to the product publications, or contact
your HP authorized service representative.
Number of Interswitch Links (ISLs) – The maximum supported number of
ISLs for edge switches is all available switch ports. For redundancy, at least
two ISLs should connect any two switch-class fabric elements. Because this
number is subject to change, contact your HP authorized service
representative for the current number of ISLs supported per switch.
.
HP StorageWorks
Edge Switch Release Notes