Connection Requirements; Pin Connector 16-Bit Scsi Model (Mp Model); Figure 4.13 Connectors And Terminals Location (Mp Model) - Fujitsu MAN3184MC - Enterprise 18.4 GB Hard Drive Product/Maintenance Manual

4.3

Connection Requirements

4.3.1

68 pin connector 16-bit SCSI model (MP model)

(1) Connectors
Figures 4.13 show the locations of connectors and terminals on the 68 pin connector type 16-bit
SCSI (MP) model.
•
Power supply connector
•
SCSI connector
•
External operator panel connector
Power supply
connector
(CN1)
External operator
panel connector
(CN1)
(2) SCSI connector and power supply connector
a. 16-bit SCSI
The connector for the SCSI bus is an unshielded P connector conforming to SCSI-3 type
which has two 34-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.14 shows the SCSI
connector. See Section C.2 in Appendix C for the signal assignments on the SCSI connector.
For details on the physical/electrical requirements of the interface signals, refer to Sections 1.3
and 1.4 in the SCSI Physical Interface Specifications.
SCSI connector
(CN1)

Figure 4.13 Connectors and terminals location (MP model)

C141-E128-01EN
External operator panel
connector (CN2)
MAN series
4 - 11