External Operator Panel Connector (Cn2) - Fujitsu MAH3091MC - Enterprise 9.1 GB Hard Drive Product/Maintenance Manual

(4) External operator panel connector Signals
a. 16-bit SCSI –ID3, –ID2, –ID1, –ID0: Input signals (CN-2-02, 04, 06, 08 pin)
These signals are used for providing switches to set the SCSI ID of the IDD externally. Figure
4.27 shows the electrical requirements.
(IDD)
CN2-08
CN2-06
CN2-04
CN2-02
Figure 4.27 16-bit SCSI ID external input
C141-E103-02EN
4 - 25