Table of Contents
Advertisement
1.
Always ground yourself with a wrist strap connected to ground before
handling. ESD (Electrostatics Discharge) may cause the damage to the
device.
2.
To prevent electrical damage to the disk drive, turn the power off before
mounting or removing a PCA or connecting or disconnecting a cable,
connector, or plug.
3.
Do not turn the power on while removing a PCA. This operation is
required to prevent unexpected or unpredictable operation.
4.
Do not use a conductive cleaner to clean a disk drive assembly.
5.
Open all ventilation holes to prevent overheating of electric circuits.
6.
Ribbon cables are marked with a colored line. Connect the ribbon cable to a
cable connector with the colored wire connected to pin 1.
6.2.2
Maintenance requirements
(1)
Preventive maintenance
Preventive maintenance such as replacing air filters is not required.
Damage
Do not open the DE in the field because it is completely sealed.
(2)
Service life
See "(3) Service life," in Section 2.1.5.
6 - 6
CAUTION
CAUTION
C141-E103-02EN
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
