Teac DVW-D11 User Manual page 19

11. Press the
then press the
The data will be copied from the selected partition when you specify the hard
disk drive as the source and execute the copy function as described in Steps
13 through 16.
12. Press the
menu.
13. Press the
then press the
options.
14. Press the
button.
(ENT)
The hard disk drive is now designated as the source drive.
15. Press the
The LCD will display a message similar to the following:
1 Copy. P : A
This message indicates that the data will be copied from the hard disk drive's
partition "A" (which was selected in Step 11).
(If you selected partition B, the LCD will display the message:
"
1 Copy. P : B
16. Place a blank DVD-R disc into the target drive, then press the
button to start copying.
TEAC DVD Duplicator User's Manual
Loading Data to and Copying from the Hard Disk Source Drive
/ buttons to select the partition you wish to copy from,
button.
(ENT)
button twice to exit to the DVD Duplicator's main
(ESC)
/ buttons to select function menu
button to access a list of available source drive
(ENT)
/ buttons to select the hard disk drive, then press the
button to switch to function
," and so on.
)
[8 Select Source]
.
[1 Copy]
,
(ENT)
11