Teac DVW-D11 User Manual page 12

Front Panel
Press the ENT (Enter) button to execute a selected function.
Press the ESC (Escape) button to cancel a selected function or to return to
the main menu.
source drive disc tray: Insert the disc to be copied into the source drive. Use
the disc tray to load a DVD into the drive. You can open the tray by pressing
the eject button (if the tray fails to open, you can use the emergency eject
mechanism). You can close the tray by pressing the eject button.
Notes:
❑ TEAC strongly recommends that you do not push the tray in to close it.
Please press the eject button to eject or retract the tray.
❑ The DVD Duplicator may include an internal hard disk drive as an
alternate source drive. Please refer to "Specifications" on page 28 for
detailed information on the model that you purchased.
target drive disc tray: Insert a blank disc into the target drive to make a copy
of the source disc. You can open the tray by pressing the eject button (if the
tray fails to open, you can use the emergency eject mechanism). You can
close the tray by pressing the eject button.
Note: TEAC strongly recommends that you do not push the tray in to close
it. Please press the eject button to eject or retract the tray.
LED power indicator: The LED power indicator will be continuously lit
when the DVD Duplicator power is on
power switch: Use the power switch to turn the power to the DVD Duplicator
unit on and off.
4
.
TEAC DVD Duplicator User's Manual