Sony NSR 1050H - Standalone DVR - 16 CH Installation Manual page 22

Set the IP address for LAN connector 2, and click
[Next].
↓
Set the IP address for LAN connector 3, and click
[Next].
↓
22
Step 3: Settings
Configure settings for monitor 1, and click [Next].
• If you select [Auto], the type of monitor connected
and its resolution are detected and configured
automatically.
For details on supported resolutions, see "System
Requirements" (page 5).
• When connecting two monitors to the unit, select the
[Dual Head] check box.
↓
If connecting a second monitor, configure settings for
monitor 2.
After configuring settings for the second monitor, restart
the unit while the second monitor is connected
↓
Select the audio output connector to use, and click
[Next].
↓