StarBoard FX-TRIO Series
3.2 Adjusting the Sensor
3.2.1 Items to Check Before Making Sensor Adjustments
The following error may appear while using this product.
(Windows)
Check the following items if this error appears.
・Check that light is not blocked from reaching the board surface or reflective tape.
・Check that the reflective tape is not dirty.
If the problem is not corrected despite making the above checks, In the operating system you
are using, perform adjustment in accordance with " Sensor Adjustment Procedure " shown in
Section 3.2.2 in the case of Windows and 3.2.3 in the case of Mac OS.
3.2.2 Sensor Adjustment Procedure (Windows version)
[1] Press the "Adjust Camera" button on the "LSaDrv Touch Sensor Error" dialog box displayed
on the PC screen.
Manual Startup
In order to manually run the sensor adjustment wizard, open "My Computer" and
execute "LsCamWiz.exe" located under "C Drive" (*) → "Program Files" → "Hitachi
Software Engineering" → "FX-DUODriver".
(*)This folder path may be changed since it depends on your Windows installation.
The window may be displayed
hidden behind another window.
3-4
Appendix
(Mac)
English