1. Manuals
  2. Brands
  3. HitachiSoft Manuals
  4. Interactive whiteboard
  5. StarBoard FX-TRIO-88W
  6. User manual

HitachiSoft FXTRIO-88W User Manual

User guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

StarBoard FX-TRIO Series
User's Guide
How to Request a User's Guide
When requesting a separate copy of this User's Guide, specify FXT-ML100701.
Read this User's Guide and carefully retain it for future reference.
Before using this product, carefully read and fully understand the safety instructions. Store
this User's Guide nearby for ease of reference.
FXT-ML100701

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FXTRIO-88W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HitachiSoft FXTRIO-88W

Summary of Contents for HitachiSoft FXTRIO-88W

  • Page 1 StarBoard FX-TRIO Series User’s Guide How to Request a User's Guide When requesting a separate copy of this User's Guide, specify FXT-ML100701. Read this User's Guide and carefully retain it for future reference. Before using this product, carefully read and fully understand the safety instructions. Store this User's Guide nearby for ease of reference.
  • Page 3 Also, the company makes no warranty as to the product's suitability, merchantability or fitness for a particular intended use. All products of Hitachi Software Engineering Co., Ltd., described in this User's Guide are presently for sale or are site-licensed. Users who purchased the aforesaid product(s) will bear the costs of all required services, repairs,...

  • Page 4: Product Assurance Provisions

    Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. Other trademarks and product names are trademarks and/or registered trademarks of their respective holders Manual Creation Dates July 2010 first edition FXT-ML100701 All Right Reserved, Copyright(c) 2010, Hitachi Software Engineering Co.,Ltd. English...
  • Page 5 StarBoard FX-TRIO Series Introduction Thank you very much for purchasing Hitachisoft’s StarBoard FX-TRIO (henceforth referred to as "StarBoard"). This User's Guide has been created for people who already have a working knowledge of personal computers (henceforth referred to as "PC"). Please make sure that you understand the contents of this User's Guide and use the software correctly.
  • Page 6 StarBoard FX-TRIO Series Safe Handling Safe Handling Markings and Symbols Various markings and symbols are used in this User's Guide and on this product, to ensure the safe and correct use of this product and to prevent personal injury and property damage. These symbols and their meanings are as explained below.
  • Page 7 StarBoard FX-TRIO Series Safe Handling Safe Precautions Required Precautions (1) Precautions Regarding Operation WARNINGS Do not make modifications. Do not make any adjustments, repairs, or modifications not given in this User's Guide as doing so may lead to personal injury or damage to the product.
  • Page 8 StarBoard FX-TRIO Series Safe Handling (2) Dealing with Trouble CAUTIONS What to do in case of emission of smoke, strange odor, or strange noise If an abnormal condition such as emission of smoke, strange odor, or strange noise happens to occur for some reason, immediately disconnect the product's USB cable from the PC.
  • Page 9 StarBoard FX-TRIO Series Safe Handling NOTICE Disconnect the USB cable during extended periods of non-use. For safety reasons, disconnect the USB cable if the product is not going to be used for an extended period of time. Failure to comply may result in malfunction.
  • Page 10 StarBoard FX-TRIO Series Safe Handling (5) Precautions Regarding Setup Environment WARNINGS Wall mounting work should be performed by a construction specialist. Improper work m ay result in death or personal injury due to the product falling during operation. Always use the specified mounting unit Improper assembly may cause the product to fall over.
  • Page 11 StarBoard FX-TRIO Series Safe Handling NOTICE Regarding the setup environment Set up this product on a level floor surface with a weight bearing capacity of 150 kg/m or more, and which is made of floor materials that will not deform or become depressed due to movement by casters.
  • Page 12 StarBoard FX-TRIO Series Safe Handling Careful thought was given to the cautions on this device and in this User's Guide. However, unanticipated circumstances might occur. When operating this product, users themselves must exercise caution as well as follow instructions. WARNINGS Warnings Contents Page(s) Keep the wall material in mind when installing.
  • Page 13 StarBoard FX-TRIO-77 Safe Handling NOTICE Notice Contents Page(s) - Select a level and stable position. - Do not set it up near equipment that might generate electromagnetic waves radio frequencies, such as radio transmitters, televisions, copying machines P.1-7 or air conditioners.

  • Page 14: Table Of Contents

    Contents StarBoard FX-TRIO Series Contents 1. INTRODUCTION ......................1-1 ......................1-1 1.1 P REPARATIONS ....................1-1 1.1.1 Product Outline ....................... 1-1 1.1.2 Features ......................1-2 1.2 P ARTS HECK ......................1-2 1.2.1 StarBoard ....................... 1-3 1.2.2 Stand (option) ..................1-4 1.2.3 Electronic Pen (option) .....................

  • Page 15: Introduction

    StarBoard FX-TRIO Series Introduction 1. Introduction 1.1 Preparations This chapter describes the preparations to be made before using StarBoard. First-time users of StarBoard should read through this chapter. 1.1.1 Product Outline The StarBoard FX-TRIO is an extremely convenient and easy-to-use electronic whiteboard. After setting up the provided software on a PC that is connected to a projector, you can use your finger or the stylus pen that is included with the product to operate the PC or import to the PC in real time characters or images that are drawn on the whiteboard.

  • Page 16: Parts Check

    StarBoard FX-TRIO Series Introduction 1.2 Parts Check After unpacking, make sure that all the following parts are present. 1.2.1 StarBoard [1] Parts Name StarBoard Pen holder (with installation part) Stylus pen Wall-mounting bracket StarBoard Software x.x (DVD-ROM) (*1) StarBoard Software Startup Guide StarBoard FX-TRIO Startup guide Warranty Sheet Sponge mat (small)

  • Page 17: Stand (Option)

    StarBoard FX-TRIO Series Introduction 1.2.2 Stand (option) [1] Parts Name Stand vertical support Stand crossbar Stand foot with casters Board receiving bracket (left-hand version) Board receiving bracket (right-hand version) Board fixing bracket Hex socket head cap screw, with collar Hex socket head cap screw Pan head screw (10) Triangular knob screw...

  • Page 18: Electronic Pen (Option)

    StarBoard FX-TRIO Series Introduction 1.2.3 Electronic Pen (option) [1] Parts Name Electronic pen AAA alkaline battery Spare pen tip English...

  • Page 19: Role Of Each Part

    StarBoard FX-TRIO Series Introduction 1.3 Role of Each Part 1.3.1 StarBoard (1) Digitiser Storage Area (5) Casters (Parts of Stand) Receives information regarding characters or These are the casters for moving the board. After images drawn with the pen or the user's setting up the StarBoard, be sure to lock the finger, and transmits this data to the PC.

  • Page 20: Function Area

    StarBoard FX-TRIO Series Introduction 1.3.2 Function Area The function area is provided with shortcut keys for the functions that are frequently used in the StarBoard Software. Use by clicking the middle of the symbol with your pen or finger. With the exception of touch mode/pen mode selection and one-time right click, you can customize the shortcuts with the software for Windows.

  • Page 21: Electronic Pen (Option)

    StarBoard FX-TRIO Series Introduction 1.3.3 Electronic Pen (option) Battery cover Open the cover when inserting or replacing the battery. Refer to page 2-4 in this User's Guide for details. Side buttons Mouse Operations assigned to these buttons.Refer to page 2-6 in this User's Guide for details.

  • Page 22: Wall-Mounting Setup Method

    StarBoard FX-TRIO Series Introduction 1.4.1 Wall-Mounting Setup Method WARNINGS Keep the wall material in mind when installing. Installing the board on to the wall in a way that does not suite the wall material, may result in the board falling off the wall causing injuries or damage to the board. Furthermore, wall installation may not be possible depending on the wall.
  • Page 23 StarBoard FX-TRIO Series Introduction [2] Install the board CAUTION Be sure to use two or more people for this work. Failure to comply may cause the board to fall, resulting in personal injury, or may cause damage to this product due to shock of impact. Attach the small sponge lower of height adjustment stay as shown in figure.
  • Page 24 StarBoard FX-TRIO Series Introduction [3] Settle the board (The following work is necessary for FX-TRIO-88W.) Make sure that the 2 wall-mount stabilizing sponges are touching the wall when the board is mounted on the wall. If either of the sponges do not touch the wall, apply the sponge mat (large) to the wall-mount stabilizing sponge, and adjust the space between the sponge and the wall.

  • Page 25: Stand Setup Method

    StarBoard FX-TRIO Series Introduction 1.4.2 Stand Setup Method Reconfirm that all the parts are present before assembling and setting up the stand (option). WARNINGS Tighten the screws securely. Failure to comply may cause the stand to collapse, resulting in personal injury, or may cause damage to this product due to shock of impact from the board falling.
  • Page 26 StarBoard FX-TRIO Series Introduction [2] Install the board WARNINGS Tighten the screws securely. Failure to comply may cause the board to fall, resulting in personal injury, or may cause damage to this product due to shock of impact from the board falling. CAUTION Be sure to use two or more people for this work.
  • Page 27 StarBoard FX-TRIO Series Introduction [3] Adjust the height CAUTION Be sure to use two or more people for this work. Failure to comply may cause the board to fall, resulting in personal injury, or may cause damage to this product due to shock of impact. The StarBoard can be positioned at six height levels.

  • Page 28: Pen Holder Setup Method

    StarBoard FX-TRIO Series Introduction 1.4.3 Pen Holder Setup Method [1] Installation method Insert the pen holder into the rail on the right side on the back of the board and slide it to the desired position. [2] Removal method To remove the pen holder, apply pressure to the top of the pen holder and pull it back. English 1-14...
  • Page 29 StarBoard FX-TRIO Series Introduction [3] To change the position of the penholder (a) Remove the installation part from the pen holder. (b) Insert the installation part into the opposite groove. (c) Insert the pen holder into the rail on the left side on the back of the board and slide it to the desired position.

  • Page 30: Equipment Connection Method

    StarBoard FX-TRIO Series Introduction 1.4.4 Equipment Connection Method Before Starting to Connect Equipment Install the StarBoard Software on your PC before starting to connect equipment. The equipment might not operate correctly if it is connected without the software being installed. Connect the PC, projector and StarBoard according to the following procedure.

  • Page 31: How To Use

    StarBoard FX-TRIO Series How to use 2. How to Use 2.1 How to Use Touch Mode This section gives a basic description of how to use the board in touch mode. 2.1.1 Character Input To input characters, use your finger or the stylus that was provided with the product. NOTICE Use an input tool with a thickness of least 7 mm.

  • Page 32: Pc Operations

    StarBoard FX-TRIO Series How to use - Using your finger Extend your finger and touch the board. In the same way as the stylus pen, if you touch the board with anything other than your finger or you are too close to the board, it might cause an incorrect operation.
  • Page 33 StarBoard FX-TRIO Series How to use CAUTION Do not strike the board forcefully with the stylus pen, bend it, or apply an excessive load to it. Failure to comply may result in damage to the stylus pen or personal injury. Important Keep the stylus pen in the pen holder when not in use.

  • Page 34: How To User The Electronic Pen

    StarBoard FX-TRIO Series How to use 2.2 How to User the Electronic Pen This section gives a basic description of how to use the electronic pen (option). 2.2.1 Inserting the Battery Perform the preparations for using the electronic pen. CAUTION Be sure to install batteries correctly.

  • Page 35: Using The Electronic Pen

    StarBoard FX-TRIO Series How to use 2.2.2 Using the Electronic Pen To use the electronic pen to draw characters or images, place the tip of the electronic pen on the board and then move the pen. When you release the tip of the electronic pen from the board, the writing is complete.

  • Page 36: Basic Operations Of The Electronic Pen

    StarBoard FX-TRIO Series How to use 2.2.3 Basic Operations of the Electronic Pen In the default settings of the electronic pen, the pen tip button is set to the left button of the mouse in Windows and the main button click in Mac. You can use the pen tip button to perform the following mouse operations while Windows or Mac is running.

  • Page 37: Start Method

    "3. Appendix 3.1 Troubleshooting" on page 3-1 of this User's Guide. (6) Run "LsCamWiz.exe" located under "My Computer" → "C Drive" (*)→ "Program Files" →"Hitachi Software Engineering" → "FX-DUODriver", and adjust the sensor according to the instructions on pages 3-4.

  • Page 38: Start Method (Mac Version)

    StarBoard FX-TRIO Series How to use If the positions of the pen tip and cursor are out of alignment, select "MENU" on the StarBoard Software toolbar → "Settings" → "StarBoard"→ "Calibrate," and then perform position alignment. Important Conduct sensor adjustments upon first-time operations and whenever the board has been moved.
  • Page 39 StarBoard FX-TRIO Series How to use If the positions of the pen tip and cursor are out of alignment, select "MENU" on the StarBoard Software toolbar → "Settings" → "StarBoard" → "Calibrate," and then perform position alignment. Important Conduct sensor adjustments upon first-time operations and whenever the board has been moved.

  • Page 40: Appendix

    StarBoard FX-TRIO Series Appendix 3. Appendix 3.1 Troubleshooting Before assuming the product is broken, be sure to check adjustments, proper handling procedures, the possibility of faulty cable connections, etc. Recognition-Related Problems Problem What to check What to do cable Connect the USB cable to the PC. The StarBoard does not connected to the PC? recognise input.
  • Page 41 StarBoard FX-TRIO Series Appendix Input-Related Problems Problem What to check What to do The input position does not position alignment Perform proper position alignment. match. been performed properly? Other than the above Contact a support center. The position cannot be Have the StarBoard and Adjust the position of the StarBoard aligned properly.
  • Page 42 StarBoard FX-TRIO Series Appendix Problem What to check What to do Electronic pen operation is Is a remote controller for Stop operating the remote controller. unstable or stops. equipment being operated while using the pen? Replace the batteries. The battery charge of the （For details on battery replacement, electronic pen may be low.

  • Page 43: Adjusting The Sensor

    Manual Startup In order to manually run the sensor adjustment wizard, open "My Computer" and execute "LsCamWiz.exe" located under "C Drive" (*) → "Program Files" → "Hitachi Software Engineering" → "FX-DUODriver". (*)This folder path may be changed since it depends on your Windows installation.
  • Page 44 StarBoard FX-TRIO Series Appendix [2] "Camera Adjustment Wizard Start" window appears. Press "All Adjust." [3] Press “Finish” This completes sensor adjustment. After making adjustments, check that input can be performed normally. English...

  • Page 45: Sensor Adjustment Procedure (Mac Version)

    StarBoard FX-TRIO Series Appendix 3.2.3 Sensor Adjustment Procedure (Mac version) [1] Press the "OK" button on the "LSaDrv Touch Sensor Error" dialog box displayed on the Mac screen. [2] Start the sensor adjustment wizard. Start "Go" → "Applications" → "StarBoard" → "Lsadrv" folder → "LsCamWiz." [3] The sensor adjustment wizard starts.
  • Page 46 StarBoard FX-TRIO Series Appendix [4] Wait a while. If the "LsCamWiz ERROR" message does not appear, sensor adjustment was successful. If an error such as the following appears, click the "OK" button and then perform adjustment again while referring to Section 3.2.1. If adjustment is still not successful, the FX-TRIO unit may be defective.

  • Page 47: Regularly Auto Sensor Adjustment (For Windows)

    StarBoard FX-TRIO Series Appendix 3.3 Regularly Auto Sensor Adjustment (For Windows) While using StarBoard, auto sensor adjustment will execute regularly. To use StarBoard comfortably this function is recommended to use. You cannot use this Adjustment for Mac. 3.3.1 Sensor Auto Adjustment Procedure [1] Confirmation message of auto sensor adjustment will be displayed after 7days as default passed from first connect of StarBoard to PC.
  • Page 48 StarBoard FX-TRIO Series Appendix [2] Sensor adjusting screen will be displayed during auto adjustment. Do not touch the board surface until auto adjustment completed. [3] Following window will be displayed when sensor auto adjustment finished. Press “OK”. This is all of auto sensor adjustment. Confirm the normal input after adjustment * In case of adjustment error, following window will be displayed.

  • Page 49: System Specifications

    StarBoard FX-TRIO Series Appendix 3.4 System Specifications Item Specification Model name StarBoard FX-TRIO-77 StarBoard FX-TRIO-88W Detection method Infrared image sensor system Digitiser resolution 0.05mm Sampling rate Approx. 100 points/second when using (USB1.1 Full Speed) Interface USB 1.1 (cable length：4.7m) USB 1.1 (cable length：4.5m) Approx.

  • Page 50: Proper Care And Cleaning

    StarBoard FX-TRIO Series Appendix 3.5 Proper Care and Cleaning Clean the StarBoard periodically so that you may use it for a long time to come. (1) Cleaning the StarBoard ・ To clean the StarBoard, use a soft cloth dampened with whiteboard cleaner or a diluted neutral cleansing agent that does not contain a polishing compound.

  • Page 51: Product Warranty Policy

    StarBoard FX-TRIO Series Appendix 3.7 Product Warranty Policy 1. During the free warranty service period, if a malfunction occurs during normal use, the malfunction will be corrected without charge, according to the provisions of the warranty. Furthermore, if the customer registration card accompanying the warranty is not returned to our company, the customer information will not be registered;...
  • Page 52 StarBoard FX-TRIO Series Appendix (8) In the event of a malfunction in this product caused by the connection to this product of equipment other than the equipment specified by our company. (9) In the event that there is no abnormality in this product, but a defect in a part other than this product was detected or remedied.

This manual is also suitable for:

Starboard fx-trio series

Table of Contents