Stand Setup Method - HitachiSoft FXTRIO-88W User Manual

StarBoard FX-TRIO Series

1.4.2 Stand Setup Method

Reconfirm that all the parts are present before assembling and setting up the stand (option).
WARNINGS
Tighten the screws securely.
Failure to comply may cause the stand to collapse, resulting in personal injury, or
may cause damage to this product due to shock of impact from the board falling.
[1] Assemble the stand
FX-TRIO is available with the stand.
Assemble the stand according to the following diagram. The numbers in the diagram
correspond to the numbers in the parts list on page 1-3.
(7)
Long Short
Align both feet with the
longer side facing
forward.
(1)
(4)
(9)
(5)
(2)
Fasten with a
Phillips screwdriver.
(3)
(8)
1-11
Introduction
(7)
Fasten with a
Hexagonal
wrench.
English