Pen Holder Setup Method - Hitachi StarBoard FX-DUO-63 User Manual

StarBoard FX-DUO Series
2. Remove the tape cover and fix the board on to the wall.
NOTICE
When detaching the wall the paint might peel off from the wall and the doble-faced tape
might remain on the wall by the adhesiveness of the double-faced tape's glue and the wall.
Install the board at your own risk.
About using Sponge mat (large)
If there is space between the board and the wall, apply the sponge mat (large) to adjust the
space.

1.4.3 Pen Holder Setup Method

[1] Installation method
Insert the pen holder into the rail on the right side on the back of the board and slide it to the
desired position.
1-13
Introduction
English